With the original GT3 air gets diffused and creates lots of turbulence in the filter. With our air ram, at 65 mph and above the air will be channeled into the intake system. The FVD ram-air spoiler increases air volume and injects cooler air which means more power. Our set is 2cm higher then the original ones.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

General Fitment

With the original GT3 air gets diffused and creates lots of turbulence in the filter. With our air ram, at 65 mph and above the air will be channeled into the intake system. The FVD ram-air spoiler increases air volume and injects cooler air which means more power. Our set is 2cm higher then the original ones. From kevlar carbon

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

General Fitment

These spark plug connectors often degrade over time and exposure to extreme temperatures. For the best performance, replace connectors that are worn, cracked, or even missing. Sold each, 6 needed per car.

View/Change Diagram

Boxster 1997-04 - Electrical	Boxster 2005-08 - Electrical
Cayman 2006-08 - Electrical	911 1998-05 - Electrical
911 Turbo/GT2 2001-05 - Electrical	911 2005-08 - Electrical
911 Turbo/GT2 2007-09 - Electrical	911 GT3 2003-05 - Electrical
911 GT3 2007-11 - Electrical

This bilstein b16 damptronic active coil over suspension kit features ride height and damping adjustability that is compatible with the Porsche pasm electronic damping system. The damptronic system constantly monitors the road surface via sensors, so the vehicle adjusts for perfect traction, unparalleled control and stable handling. Each active Porsche electronic suspension feature, control and setting is retained and all function in the same manner. The front and rear progressive rate springs are matched with bilstein's famous monotube performance dampers. This suspension is custom tuned for the 991.1 and 991.2 variants. The front and rear threaded damper bodies allow .8 - 1.5 inches (20-40 mm) of travel whic...(choose a part on the right to read more)

The bilstein b16 (pss10) suspension kit is the ultimate race inspired suspension system, delivering unsurpassed driving performance in any situation. This suspension kit puts you in complete control, providing the kind of precise suspension tuning formerly available only on race cars. From a weekend of competition to daily driving, this system provides perfect handling performance for every situation. The manually adjustable damping mono-tube gas shock absorbers feature 10-stage precise compression and rebound settings, from comfort to competition. The bilstein b16 (pss10) suspension kit utilizes debris resistant round threads on these dampers to ensure spring adjustment remains effortless throughout the life o...(choose a part on the right to read more)

Made in europe by one of the manufacturers to Porsche. Extremely high-quality grp (glass-reinforced plastic) rear bumper that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight 9.7 lbs. (4.4 kg) - made of high strength, grp (glass-reinforced plastic) sold individually. 1 necessary per car. Please note: this only fits in conjunction with widebody / rsr rear fenders, part # FVD503930001 . Please provide us with the year / model. These are high quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. All grp products must proper...(choose a part on the right to read more)

Tr!ckstuff r105 performance sport - blue the optimum endurance pads with enhanced brake performance at medium coefficient of friction. This ceramic pad is designed for the demands of endurance racing, like 24-hr racing. It is extremely resistant to fading over 650*c, and demonstrates minimal pad and rotor wear. Wet weather conditions or salt won't effect the brake performance of this pad due to the integrated corrosion protection. Like new

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

High-quality victor reinz replacement gasket set, designed to perform like the original. Victor reinz gaskets are extremely adaptable and flexible, yet also possesses great mechanical strength. High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®.
The correct brake pad can make the difference between winning and losing. Pagid race pads are only for racing.
Correct brake-in after refreshing the brake pads:
* 3 to 4 brake applications with medium pedal pressure from 100 mph to 50 mph. Allow 900-1500 feet cooling time between brake applications.
* 2 to 3 brake applications with harder pedal pressure from 110 mph to 60 mph. Allow 1500 feet cooling time
Between brake applications. Avoid wheel lock-up and abs.
* 1 to 2 in-between clean-up brake applications. Do not allow the brake pads to overheat during the break in period.
Orang...(choose a part on the right to read more)

General Fitment

Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®.
The correct brake pad can make the difference between winning and losing. Pagid race pads are only for racing.
Correct brake-in after refreshing the brake pads:
* 3 to 4 brake applications with medium pedal pressure from 100 mph to 50 mph. Allow 900-1500 feet cooling time between brake applications.
* 2 to 3 brake applications with harder pedal pressure from 110 mph to 60 mph. Allow 1500 feet cooling time
Between brake applications. Avoid wheel lock-up and abs.
* 1 to 2 in-between clean-up brake applications. Do not allow the brake pads to overheat during the break in period.
Yello...(choose a part on the right to read more)

General Fitment

For 997-2 with OEM or valved Porsche sport exhaust (pse). Facts: - equal length headers with long tube design - 200 cell hd German hjs tri metal sport cats - 2.5 tubing (63.5 mm) - made in Germany power: - 997.2 (3,6l) = + 20 crank hp (15 kw) & + 15 crank torque (20 nm) - 997.2s (3,8l) = + 23 crank hp (18kw) & 22 crank torque (30nm) - with FVD flashclient software = + 37 crank hp (28kw) & + 30 crank torque (40 nm) our latest development for the 997.2 is aimed at those who are looking for more torque in the mid range, a rich, deep exhaust growl. These headers contain the latest hjs cats, they are nicknamed "hd" for high durability matrix design catalytic converters. They have a sm-matrix (winding of three flat...(choose a part on the right to read more)

Double spring suspension (racing) for 924 only for 20mm spring strut mounting this sport suspension was tuned and tested for racing use only (hockenheimring.net). Perfect handling, recommended for race and clubsport. Not for street use (racing suspension). The lowering is adjustable (30-70mm front and 30-60mm rear). By using springs at the rear axle instead of torsion bars you improve extreme the handling of your car. By removing the rear torsion bars is the weight saving approximately 25kg.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This bilstein b16 damptronic active coil over suspension kit features ride height and damping adjustability that is compatible with the Porsche pasm electronic damping system. The damptronic system constantly monitors the road surface via sensors, so the vehicle adjusts for perfect traction, unparalleled control and stable handling. Each active Porsche electronic suspension feature, control and setting is retained and all function in the same manner. The front and rear progressive rate springs are matched with bilstein's famous monotube performance dampers. This suspension is custom tuned for the 991.1 and 991.2 variants. The front and rear threaded damper bodies allow .8 - 1.5 inches (20-40 mm) of travel whic...(choose a part on the right to read more)

If you are looking for added damping performance on the street, the bilstein b6 is the ideal solution. If you are running lowering springs, mo30 or mo33 springs, or stiffer springs we suggest the bilstein b8 shocks. The product benefits at a glance: optimum adhesion and enhanced stability for daily driving and extreme driving situations. Marked improvement in safety and sportiness without additional spring changes. Increased service life. Bilstein gas pressure technology. Bilstein mono-tube/upside-down technology. Made in Germany. Road-tested and fine-tuned by bilstein. German TUV registration is not required. Sold individually.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive...(choose a part on the right to read more)

If you are looking for added damping performance on the street, the bilstein b6 is the ideal solution. If you are running lowering springs, mo30 or mo33 springs, or stiffer springs we suggest the bilstein b8 shocks. The product benefits at a glance: optimum adhesion and enhanced stability for daily driving and extreme driving situations. Marked improvement in safety and sportiness without additional spring changes. Increased service life. Bilstein gas pressure technology. Bilstein mono-tube/upside-down technology. Made in Germany. Road-tested and fine-tuned by bilstein. German TUV registration is not required. Sold individually.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive...(choose a part on the right to read more)

tr!ckstuff ts66 performance racing - red ece-r90 tüv

Our ultimate racing brake pad with carbon is designed for the race conditions up to 6 hrs and it shows its full potential here. It is resistant to fading above 650°c and has an extremely high coefficient of friction. The matrix of the mixture ensures a constant brake performance even in wet weather conditions.

Fits: GT3 cup 3.6l (05-07), GT3 rs, 3.6l, 305kw (07-09), GT3, turbo (07-09), Carrera 4s, 3.8l, 283kw (09-), Carrera 4, 254kw (09-), Carrera s, Carrera, 261kw (05-08), 239kw (05-08), GT3 r/rs (99-03), GT3-cup (98-04), GT3 04-05 (04-05), GT2 (01-05), turbo (01-05)

General Fitment

Bei diesem produkt handelt es sich um die schwarze "xl ausfuhrung" aus perlonvelours der recaro pole position sitzschale mit abe fur ihren Porsche 986/996 (andere modelle eintragung beim TUV). Die deutlich ausgepragte sitzflachen- und lehnenseitenfuhrung sorgt fur eine optimale fahrzeugbeherrschung in extremen fahrsituationen. Die im gesassbereich ca. 2,5 cm schmalere version des sitzes finden sie unter [07098uu11]. Was ist das besondere an der recaro pole position sitzschale fur ihren Porsche? Sitzschale aus glasfaser verstarktem kunststoff (gfk) angepasste gurtdurchfuhrung zur verwendung des 3-punkt-gurtes integrierte kopfstutze, die den kopf zuverlassig schutzt besonders ausgeformte schulterunterstutzung f...(choose a part on the right to read more)

General Fitment

The 11.8:1 compression will provide you with more acceleration than kits with 11.3:1 compression. For track use we recommend more aggressive cam (maximum valve lift (tdc) of 2.1 mm) . Piston's has very deep pockets for use with sport valves. These are 107 mm in size so are slip fit and do not require modifications. This kit is ideal for track use but can also be used on the street, it will add 35+ hp (depending on your additional modifications). Mahle pistons are forged for substantially higher and more uniform strength over pistons that are cast. Mahle cylinders are manufactured from st52 steel which has extremely high thermal resistance, they are nikasil coated which reduces wear and friction. We also have t...(choose a part on the right to read more)

Waterproof cloth tape for reliable sealing, masking or concealing of racing fender benders. High initial tack and extremely good adhesion. Pe coated cloth tape, waterproofed. Excellent for repairs, crafting and fixing. Extra strong adhesion, which also allows installation on uneven surfaces. 50 mm wide x 50 meters long.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Vht flameproof™ coating will renew and extend the life of any surface exposed to extremely high temperatures. This unique coating is a matte finish, silicone ceramic base widely used by the automotive industry on exhaust systems and the aerospace industry for jet engines, re-entry vehicles and other high temperature applications. Vht flameproof™ coating will withstand temperatures up to 2000°f (1093°c) and is ideal for use on headers, exhaust systems, or wherever an extreme temperature coating is needed.
Temperature: 1300°f-2000°f (704°c-1093°c)

General Fitment

Racingbrake rotors are engineered and manufactured to meet the needs of the performance enthusiasts. from 3d cad design to tooling development, casting, machining, and surface coating, rb controls all production processes to insure quality, performance, and value. Their patented designs, combined with proprietary alloyed cast iron and precision machining assure you that rb brake products will achieve the highest level of performance.

These two-piece rotors were engineered to be the best stock replacement two-piece rotor on the performance market. This rotor is direct bolt-on, easy to install, no additional hardware needed, and an excellent upgrade for both street and track. Not only will the rotors last ...(choose a part on the right to read more)

General Fitment

Vht flameproof™ coating will renew and extend the life of any surface exposed to extremely high temperatures. This unique coating is a matte finish, silicone ceramic base widely used by the automotive industry on exhaust systems and the aerospace industry for jet engines, re-entry vehicles and other high temperature applications. Vht flameproof™ coating will withstand temperatures up to 2000°f (1093°c) and is ideal for use on headers, exhaust systems, or wherever an extreme temperature coating is needed.
Temperature: 1300°f-2000°f (704°c-1093°c)

General Fitment

Vht flameproof™ coating will renew and extend the life of any surface exposed to extremely high temperatures. This unique coating is a matte finish, silicone ceramic base widely used by the automotive industry on exhaust systems and the aerospace industry for jet engines, re-entry vehicles and other high temperature applications. Vht flameproof™ coating will withstand temperatures up to 2000°f (1093°c) and is ideal for use on headers, exhaust systems, or wherever an extreme temperature coating is needed.
Temperature: 1300°f-2000°f (704°c-1093°c)

General Fitment

Windproof, waterproof and breathable featuring gore-tex® performance shell with comfort mapping technology. Intricate tape-sealed seams. Extremely comfortable due to a combination of gore-tex® laminates designed to meet the body’s various needs. . Two pockets on the front with waterproof zips. Reflective piping on the front and back. Adjustable seam with cord stopper. Reflective Porsche logo. Inside pocket with zip. Black.

General Fitment